7600 Electric Combined Stop/Speed Ratio and Control

  • 7600 Series EGCV/ESRV Skid
  • 7600 Series EGCV/ESRV Skid

The 7600 skid is a drop-in replacement for the 7B-EA & 9E Hydraulic Combined Valve. Made up of the proven 8655 series Stop/Ratio valve and the 3010 series Sonic Flow Gas Control Valve, the 7600 provides superior performance compared to its hydraulic counterpart. The Stop/Ratio valve features a Class VI composite seat, greatly reducing P2 pressure failures and failed starts.

At 1033 lbs., the 7600 is less than half the weight of the hydraulic combined valve and each valve can be independently removed for service. The 7600 is compatible with triple redundant -8 to +8 mA Servo Commands or 4-20 mA Position commands. With a maximum 200ms trip time, the 7600 is 5 times faster than its hydraulic predecessor. 

 

Gas Control Valve

Stop/Ratio Valve

Flow Profile

Linear

Equal Percentage

Rated Cg

Up to 4,300 Cg

11,200 Cg

Slew Time

≤700 ms

≤500 ms

Trip Time

≤350 ms

≤200 ms

Maximum Operating Pressure

620 psig (42.75 barg)

730 psig (50.33 barg)

Valve Flange Size

ASME B16.5, Class 300 Flange

ASME B16.5, Class 300 RF Flange

Fluid Temperature Range

0°F to 450°F (-18°C to 232°C)

-4° to +212°F (-20° to +100°C)

Seat Classification

Class IV per ANSI FCI 70-2

Class VI per ANSI FCI 70-2

Mean Time Between Service- Valve

96,000 Hours

32,000 Hours

Mean Time Between Service- Actuator

128,000 Hours

Ambient Temperature Range

-4°F to 212°F (-20°C to 100°C)

Valve Materials

Carbon Steel (NACE MRO175 Compliant)

Bandwidth/Frequency Response

Customizable up to 23 Hz with 3dB attentuation

Independent Feedback

2 LVDTs (optional)

Motor Coil

Class F insulation (311°F, 155°C)

LVDT Wiring

6.56 ft (2 m) Flying Lead or MIL Connector

Motor Wiring

32.8 ft (10 m) Jacketed Cable

Visual Position Indicator

Yes

Ingress Protection

IP65

Stem Leakage

Zero leakage, as shipped

Failure Mode

Spring type to drive valve to safe position (Fail Close)

Command

4-20 mA Position, -8 to +8 mA Triple Redundant Velocity

Estimated Dry Weight

1,033 lbs. (468.56 kg)

Certifications

Standard Assembly: Class 1 Div 2, Group B, C & D, T3 Ex db IIB+H2 T3 GbWith Optional LVDTs: Class 1 Div 2, Group B, C & D, T3 Ex db ib IIB+H2 T3 Gb

 

There are no other images loaded at this time.