YF 1100D300 Series Digital Motor Controller

  • YF 1100D300 Series Digital Motor Controller

    YF 1100D300 Series Digital Motor Controller

The Young & Franklin 1100D300 Series Digital Motor Controller (DMC) accepts a position or triple
redundant velocity commands to run YF’s full suite of Electromechanically Actuated (EMA) products. With a peak rating of 3.5 kW, the 1100D300 DMC provides ample power while being precise enough to ensure accurate positioning. The dynamic response of the 1100D300 DMC can be uniquely tailored to fit customer needs, allowing for a drop in replacement of existing systems. The 1100D300 is certified to EN61800, guaranteeing excellent noise immunity, and incorporates a flexible control scheme including Enable, Reset and Trip functions. No user programming is required due to factory software configuration.

Ingress Protection IP65, NEMA Indoor/Outdoor Enclosure
Line Power Input
90-140VDC (30Amps max)
Peak Output Power 3.5 kW
Operating Temperature Range
-4°F to +140°F (-20°C to +60°C)
Maximum Cable Length
250 ft (75 m)
Mean Time Between Service
Maintenance-Free
Mean Time Between Failure (MTBF)
20 Years
Command Input
4-20 mA Position, -8 to +8 mA Velocity Command (TMR)
Diagnostic Ports
User Diagnostics via RS-485 and USB Ports
Motor Protection
Optically Coupled Thermostat
Environmental
MIL-STD-810 - Shock, Vibration and Humidity
Certifications  Ex II 3 G, Ex nA IIC T4 Gc IP65 Cls I Div 2 Grp A, B, C, and D T4 Type 4

There are no other images loaded at this time.